20
Product Specification
Unbalanced Inputs:
Line 5, Line 6, Tape 1, Tape 2. 4 x pairs RCA Phono style, gold-plated with
Teflon dielectric insulation.
Balanced Inputs:
Line 1 to Line 4. 3-pin female pairs of female Neutrik XLR inputs.
Outputs:
1 x pair of 3-pin male Neutrik XLR output with 1 x pair of gold-plated RCA
Phono wired asymmetrically in parallel.
AV Bypass input:
1 x pair female 3-pin Neutrik XLR input
Intermodulation Distortion:
-120dB all inputs
Signal to Noise Ratio:
-120dB all inputs
Average Noise Floor:
-130dB
Frequency Range:
2.5Hz – 200kHz (-3dB)
Nominal Gain:
All inputs subject to 6 levels of switchable gain (x0.5, x1, x1.5, x2, x2.5, x3)
THD:
0.002% 20Hz – 20KHz
Channel Separation:
20 Hz 100dB, 1kHz 95dB, 10kHz 90dB, 20kHz 85dB
Channel Balance:
0.01dB
Input impedance:
Unbalanced 50kOhms, Balanced 100kOhms
Output impedance:
100 Ohms short circuit protected
Output Offset:
0mVDC both channels
Max Input Voltage:
17Vrms balanced, 8.5V rms unbalanced
Max Output Voltage:
17V rms balanced, 8.5V rms unbalanced
Volume Performance:
0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13 secs for full travel )
VU Meter:
Accurate to 0.5dB, 30 steps to VU Specification
DC Ouput triggers:
12V active high x 3
Power Consumption:
50W
Operating Voltage:
85 – 270V AC (50-60Hz) auto switching
Dimensions:
420mm (w) x 355mm (d) x 133mm (h)
Weight:
18Kg
Chord Electronics limited
The Pumphouse
Farleigh Bridge
Farleigh Lane
East Farleigh
Kent ME16 9NB
Tel: +44 (0)1622 721444
Fax: +44 (0)1622 721555
Email:
http://www.chordelectronics.co.uk
Содержание CPA5000
Страница 1: ...CPA5000 Reference Preamplifier...
