Chord CPA3000 Скачать руководство пользователя страница 13

Страница: 13 / 18

Select the output

Press the RESET button to select the output.

adjusting the volume

Use the volume knob to adjust the volume manually. A clockwise turn of the knob will increase the volume and an anti-

clockwise turn of the knob will decrease the volume. The volume range runs from 0 to 98 and is displayed on the

CPA3000 display as you change the volume. If the outputs are muted, a volume change will un-mute the outputs to

prevent large changes in volume from damaging your loudspeakers. The volume level is shown on the display as the

word VOL and a two digit level as shown in the example diagram below.

Volume display

changing the balance

Use the balance knob to shift the balance between the left and right loudspeaker. A clockwise turn of the knob will shift

the balance to the right speaker and an anti –clockwise turn of the knob will shift the balance to the left speaker.

Switching the VU meter

Press the front panel button marked VU to switch the VU display on and off.

Содержание CPA3000



















Результаты поиска

Содержание CPA3000

Отзывы:

Похожие инструкции для CPA3000

Бренды по названию

Популярные бренды

Chord CPA3000, Руководство пользователя

Результаты поиска

Содержание CPA3000

Отзывы:

Похожие инструкции для CPA3000

Бренды по названию

Популярные бренды