V1.0W11 WRIST PULSE OXIMETER
5
If the wrist oximeter fails to respond as described, refer to
“Error code” or discontinue until the
situation has been corrected by qualified personal.
Do not remove any covers other than the battery cover when replacing battery. There are no user-
serviceable parts inside.
Battery might leak or explode if used or disposed of improperly. Remove the battery if the oximeter
will be stored for more than 1 months.
Follow local governing ordinances and recycling instructions for disposal or recycling of the device
and device components including batteries.
The wrist oximeter is a precision electronic instrument and must be repaired by trained personnel
only.
The wrist oximeter measures arterial oxygen saturation of functional hemoglobin. Significant levels
of dysfunctional hemoglobin(caused by sickle cell anemia, carbon monoxide
，
etc.) could affect the
accuracy of the measurement.
Check the pulse oximeter sensor application site frequently to determine the positioning of the
sensor and the circulation and skin sensitivity of the user. If there is any discomfort on your
measured application
，
relocate the sensor to another finger.
Do not tamper with, or hang lanyard from the flexible circuit.
Warning!
DO NOT use the wrist oximeter when the alarms are required!
Unpacking and inspecting the wrist oximeter
Contact the carrier immediately if the shipping carton for the wrist oximeter is damaged.
Confirm that the items listed below are packed with the wrist oximeter: