Operating manual for melting and
tempering machines, type 2T70 & 2T130
Version 2019-1
3
Introduction
This tempering machine model 2T70 / 2T130 with is manufactured by
Chocoma Aps.
Havremarken 4 E
3650 Oelstykke
Denmark
Tlf: +45 36 41 42 00
This machine was manufactured in conformity with the provisions in the COUNCIL
DIRECTIVE of June 14th. 1989 on mutual approximation of the laws of the Member States on
the safety of machines (89/392/EEC as amended by directive 97/368/EEC) with special
reference to Annex 1 of the Directive on essential safety and health requirements in relation to
the construction and manufacture of machines.
This manual must be read in full, before the machine is electrically connected and put in
operation
This melting and tempering machine designed for melting 75 kg. of chocolate (type 2T70) or
175 kg. of chocolate (type 2T130) to a temperature of app. 45
0
C. Afterwards the chocolate will
be cooled to app. 29
0
C, and finally re-heated to a temperature of app. 32
0
C ready for use.
Alternatively, the chocolate is already melted to a temperature of app. 45
0
C immediately before
it is filled into the tempering machine, and then only needs to be tempered.
The above-mentioned temperatures levels must be considered as examples – the exact
temperatures are determined by the operator.
Safety
This manual must be read in full, before the tempering machine is connected and put in
operation. The manual must be accessible and close to the machine, so present and future
operators have free access to it.
It is the responsibility of the owner of the machine, that the operators fully understand the
content and guide lines of the manual. If it is not fully understood, the supplier of the machine
must be contacted to get a full and complete understanding.
This machine is designed for melting and tempering chocolate or compound and must ONLY be
used for this purpose. If the machine is used for other purposes, the manufacture and distributor
disclaim the responsibility for any damages and injuries and financial losses related to this.
Service and repair must be done by a skilled technician, and original spare parts must be used
