E-3/1
E-4/1
E-5/1
E-6/1
Display settings: “Up”/ “Down” to select; “Enter” to enter display settings page.
Press “Up” and “Down”, select the color space and confirm with “Enter” . Then,
the measurement page would show the values you need.
Note: after selection “Metamerism”, you can set the observer and light source
for metamerism comparisons.
Light source: Use “Up” and “Down” to select; press “Enter” to enter light source
selection page. Under this page, you can choose any light source, including A,
C, D50,D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
CWF, U30, DLF, NBF, TL83 and TL84 light sources, which is a total of 24 light
sources. Use “Up”, “Down” and “Enter” to confirm your choice.
Observer: Use “Up” or “Down” to select; press “Enter” to enter observer
settings page.
The instrument offers two angles: 2° and 10°. Select with “Up” or “Down”.
Tolerance settings: Use “Up” or “Down” to select; press “Enter” to enter
tolerance settings page. Use “Up” or “Down” to set the values and press
“Enter” to confirm.
E-4/1
Illum
L*a*b*,ΔE*ab
L*a*b*,CMC2.0:1.0
L*C*h,CMC2.0:1.0
L*C*h,ΔE*ch
L*C*h,ΔE*94,ΔE*00
L*u*v,ΔE*uv
X,Y,Z
Y,x,y
WI(CIE)
WI(ASTM
E313-1973
)
WI(ASTM E313-2010)
WI(Hunter)
WI(AATCC)
WI(Berger)
WI(Taube)
WI(Stensby)
page 1/2 page
E-3/1
Display settings
E-5/1
Observer
10
[Up],[Down]-Modify
E-6/1
Tolerance
11
12
www.chnspec.com
www.chnspec.com
