CHIYU BF-480 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 38

CHIYU BF-480 Скачать руководство пользователя страница 20

3.3 Serial Type

The BF-480 support three serial types: RS232, RS422 and RS485, These types are listed in the
drop-down menu for the Serial Type setting. Each setup screen and available features will differ
depending on what kind of Serial Types you select and BF-480 product model you buy. Default is
RS232

RS232/422

Baud Rate: default

19200

, range 1200bps to 230.4Kbps, Others

If no suitable Baud Rate in the drop-down menu chose others, input the value you want.

Data Bits

: 5, 6, 7,

8

(default)

Parity Check

:

None

(default), even, odd, mark, space

Stop Bits

:

1

(default), 2

Flow Control

:

None

(default), CTS/RTS (or Hardware), XON/XOFF (or Software)

Force Packet Transmit Time (ms)

: default

20

, range

0

to

65535

The timing of transmitting an Ethernet packet, in order to get the whole data in on packet,
you can tune this setting value to fit the data length of your device per transmission. The
more small value be set will get more less data in one packet.

Delimiter 1(00 to FF)

: default 0x00

Delimiter 2(00 to FF)

: default 0x00

Once receive delimiter 1 or both delimiters through its serial port, BF-450(M)/430/431
immediately packs all data currently in buffer and send it to Ethernet port.

Force Packet Transmit Length (bytes): default

0

, range

0

to

65535

The length of transmitting an Ethernet packet, in order to get a fix length data in on packet,
you can tune this setting value to fit the data length of your device per transmission.

RS485 Only

RS485 Transmission Delay Time (ms)

: default

0

, range

0

to

65535

Due to different device has different capability in handling data received from serial port. So
you can tune this setting value to slow down the speed of BF-450(M)/BF-430/431 to fit the
speed of your device handling.

«
...
18
19
20
21
22
...
»

Содержание BF-480







































Отзывы:

Нет отзывов