6
GENERAL CARE AND MAINTENANCE
Cleaning the Freezer
•
Upon installation of your new appliance, it is recommended that it be cleaned
thoroughly and properly maintained thereafter.
•
Turn off the Freezer and then unplug the unit from the wall outlet.
•
Remove all food content before washing the inside with a damp cloth soaked in
lukewarm water and dishwasher liquid.
Don’t use any chemical detergent which
might damage coating or inner liner of the freezer.
•
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently as
improper cleaning can cause the seal to dislodge and tear.
•
Dry the interior and exterior with a soft cloth.
Vacation Time
•
Turn off the Freezer first and then unplug the unit from the power point.
•
Remove all food.
•
Clean the Freezer.
•
Leave the lid open slightly to avoid possible formation of condensation, mold, or odors.
•
Use extreme caution in the case of children. The unit should not be accessible to
child’s play.
•
Short vacations:
Leave the Freezer operating during vacations of less than three
weeks.
•
Long vacations:
If the appliance will not be used for several months, remove all food
and unplug the power cord. Clean and dry the interior thoroughly. To prevent odour
and mold growth, leave the door open slightly.
Repositioning and Relocating the Freezer
•
Unplug the power cord from the wall outlet.
•
Remove all the food and drinks.
•
Securely tape down all loose items inside your Freezer.
•
Tape the doors to be closed securely.
•
It is recommended that the Freezer stays in the upright position during
transportation. But if it is laid down for transport purpose, please lift it up
immediately after the job is done. Please wait for at least 24 hours before putting the
power.