ChiQ CQRT12Y3G2RS, Инструкция по эксплуатации, Страница: 6 / 11

6
should be applied underneath the refrigerator, so as to prevent color change due to heat dissipation.
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit
breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened
by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television set surrounding it, so
try to keep the refrigerator as far away as possible in such case.
IV. Functions
Using your refrigerator
T
he internal temperature of the refrigerator is controlled by a potentiometer installed in the fresh
food compartment. Its internal temperature varies with the door opening frequency, ambient
temperature and installation location of the refrigerator.
Fridge temperature adjustment
The fridge temperature can be adjusted by means of the temperature control knob switch.
1. The temperature gets gradually decreased as you dial the temperature control knob switch
from the position “1” to “5”.
2. To set the knob switch at the “Optimal” position can meet the daily normal use.
3. When you need to strengthen cooling of the fresh food compartment, dial the temperature control knob switch in the
Coldest direction, so as to extend the compressor running time, with the temperature decreased accordingly.
Note: It is not recommended to set the temperature control knob at the “Coldest” position for a long time.
Freezer temperature adjustment
When the temperature control knob switch in the fresh food compartment remains unchanged, the freezer temperature
becomes gradually decreased as the slider of FREEZER AIR FLOW is adjusted from “MIN” to “MAX”.
Note: During the actual use, the freezer air regulating lever may be frozen due to high humidity or frequent opening of the
door. In such case, do not adjust the regulating lever by force; Instead, you are recommended to use a hot towel to heat it
locally, so that the frozen air regulating lever gets thawed before being adjusted to avoid damage.
Recommended optimal temperature modes
SEASON SUGGESTED MODES Tips
In summer (higher than 35 ℃ )
It is recommended
not to set the
regulating lever at
MAX position for a
long time.
Normal condition (spring and autumn)