Function Settings
When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated
for 2s, and the system runs in the Smart mode by default. When all the doors are close, the display gets extinguished
automatically if no key operation within 3 minutes. When the display is off, it will light up if any door is opened or any key is
pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display. (refer to 1.6
for unlocking the keys)
1.Functions
1.1Temp. setting
1
）
Fridge temperature setting
Press the Temp. Zone key to select the fridge zone, with the corresponding icon flickering, and then press the Temp.
key to adjust the temperature, finally press the OK or wait for 5s to validate the above temperature setting.
The fridge temperature setting cycles as following:
5
→
6
→
7
→
8
→
OF
→
2
→
3
→
4
→
5
；
OF refers to Fridge Off, and when OF takes effect, the fridge will stop cooling.
Take foods out of the fridge compartment before setting this function.
2
）
Freezer temperature setting
Press the Temp. Zone key to select the freezer zone, with the corresponding icon flickering, and then press the Temp.
key to adjust the temperature, finally press the OK or wait for 5s to validate the above temperature setting.
The freezer temperature setting cycles as following:
-18
→
-17
→
-16
→
-24
→
-23
→
-22
→
-21
→
-20
→
-19
→
-18
；
1.2 LECO
1
）
When the refrigerator is powered on, the LECO net flavor function will run automatically on a regular basis, lasting for
20 minutes each time; the LECO system decomposes odors and microorganisms into CO2 and H2O. At the same time,
the LECO system releases free radicals to actively eliminate bacteria, creating a cleaner cooling space.
2
）
Enabling the LECO function manually
Press the Function key to select LECO until the icon of LECO gets flickering, and then press the OK key for
confirmation. If the OK key is not pressed within 5s, the current setting will be invalidated.
3
）
Exiting the LECO function
The LECO function gets exited automatically 20 minutes after it is enabled.
Disabling the LECO function manually: Press the Function key to select LECO until the corresponding icon gets
flickering, and then press the OK key to validate the setting.
1.3 Fast Freezing
1) When the Fast Freezing function is enabled, the freezer temperature will be controlled at -32
℃
automatically, and after
26 hours of running, the Fast Freezing function gets exited. Cooling down the freezer temperature in a rapid manner is
beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
2) Enabling the Fast-Freezing function
Press the Function key to select Fast Freeze until the corresponding icon gets flickering, and then press the OK key
within 5s for confirmation. If the OK key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function
After a cumulative running period of 26 hours, the Fast Freeze function will exit automatically.
Under the Fast Freeze mode, press the Function key to select Fast Freeze until the corresponding icon gets
flickering, and then press the OK key for confirmation, the Fast Freeze function will get exited.
When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
1.4 Holiday
1
）
When the Holiday function is enabled, the fridge temperature will be controlled at 14
℃
. When you are out for a quite
Содержание CQRQ15Y4G2RS
Страница 1: ...INSTRUCTION MANUAL Model No CQRQ15Y4G2RS...
