ChiQ CBM393NB, Руководство пользователя, Страница: 13 / 15

11
TROUBLESHOOTING GUIDE
Problem Solution
The fridge has no power

Power cord isn’t plugged in properly.

The circuit breaker tripped or a blown fuse.

Try a different power point.
The light is not working.

There is no light in freezer compartment, only fridge
compartment has light.

Make sure the power is connected to the unit.
Compressor runs all the
time

The room temperature is hotter than normal.

A large amount of food has been added to the
refrigerator.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The refrigerator does not have the correct clearances.

The refrigerator has recently been disconnected for a
period of time. 6+ hours are required for the refrigerator
to cool down completely pending on operating
conditions.
Freezer is too cold and
refrigerator is too warm

Change freezer air flow setting to min position

The fridge might need a manual defrost due to too
much moisture went into the freezer part and
blocked the air channel.
To do so,
Keep food in a container with ice bag or another
fridge if it is available.
Keep both doors opening and unplug the power
cord for 24 hours.
Then turn on the unit and it will work properly
again.
Temperature inside the
refrigerator is too warm.

Temperature control is set incorrectly. Turn the control
to a cooler setting and allow several hours for the
temperature to stabilize.

Change freezer air flow setting to min position.

Door is kept open too long or is opened too frequently.
Warm air enters the refrigerator every time the door is
opened). Open the door less often.

The door is not closed completely.

The door gasket does not seal properly.