Installation
1. Connect the video sources to the Host ports on the DisplayPort switch using a DisplayPort cable.
Note:
It’s recommended that the distance between the source and DisplayPort switch be no greater than 16 ft. (5m)
at resolution up to 2560 x 1600. Distances up to 3 ft. (1m) could be achievable
on 4K@60Hz
.
2. Connect the provided external power supply to the DisplayPort switch.
3. Connect a monitor to the Output port on the DisplayPort switch using a DisplayPort cable.
Note:
When displaying video resolutions is configured to 4K UHD, 3840 x 2160 @ 60Hz, the distance between the
DisplayPort switch and the monitor should be limited in 10 ft. (3m).
Or to be limited in 50 ft (15m) at resolution
up to 2500 x 1600.
4. Turn on the power to the video sources and connected monitor. Push the Select button or the power button of
the IR remote control, the Host 1 LED will illuminate (default setting) to indicate that video signal of Host 1 is being
received and video will appear on the connected monitor.
5. Use your video cards display settings screen to make adjustments to the way video is displayed on the
connected monitors.
Note:
The DisplayPort switch is backward compatible with most DisplayPort 1.2 equipment running current
graphics drivers, with the feature set being limited to that of your equipment (e.g. you may be limited to
displaying in Clone / Mirror mode only). Compatibility with older graphics cards is not guaranteed.
Added Info
Select button:
1. At the first installation, push Select button indicates the unit turns on, and Host 1 signal is being received; video
appears on the display device.
2. And repeat pushing Select button indicates the video signal switches to either Host 2 or Host 1.
3. Pushing Select button in 3 seconds, the DisplayPort switch will set by sleeping mode; and the Host LEDs will
light off. To push Select button again, it will retrieve the previous port while restarting the unit.
4. The working memory will be terminated while the unit’s power plug is disconnected.
Description of IR remote control
Power On/Off button
Host 1 button
Host 2 button
4
