Chipolino PIRUET, Инструкция по эксплуатации

Страница: 4 / 12

3
1 – UNFOLDING THE STROLLER
Lift the hook А. Grab the handle of the stroller and pull up until frame is unfolded and you hear a „click”
sound.
2 – INSTALLATION AND REMOVAL OF THE REAR WHEELS
To remove the wheel, pull out the button with one hand and remove the wheel from the frame.
3 – INSTALLATION AND REMOVAL OF THE FRONT WHEELS
To remove the wheel, press the button with one hand and remove the wheel from the frame.
4 – SWIVEL AND STRAIGHT MOTION OF FRONT WHEELS
IMPORTANT! When using the stroller on uneven surfaces, fix the wheels for straight motion only.
5 – INSTALLATION AND REMOVAL OF THE SEAT
Insert the seat in the frame seat opening. Press until you hear a click sound and the seat is fixed.
Pull out the removal lever (located on back side of seat) and remove the seat from the frame.
6 – INSTALLATION AND REMOVAL OF THE SAEFTY BUMPER
Press the buttons on both sides of bumper and remove it from stroller.
7 – INSTALLATION AND REMOVAL OF THE LEG REST
To uninstall the leg rest, press the two pins on both sides of leg rest and pull it out of the frame tubes.
8 – ASSEMBLED STROLLER
9 – PARKING DEVICE
ATTENTION!
Always engage the parking device when the stroller is not in motion in order to avoid the
risk of stroller sudden movement!
10 – BACKREST ADJUSTMENT
Pull the lever on the backrest and move the seat from upper to lower position.
Push up with your hand to move the backrest from lower to upper position. The position is fixed when
you hear a click sound.
11 – RESTRAINT SYSTEM (5-POINT SAFETY HARNESS)
А
– central buckle
Adjust the shoulder and waist straps by using the sliders (B).
CAUTION!
Belt must be snug to child’s body and must not be twisted. Adjust the length by using the
sliders.
CAUTION!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened
CAUTION!
The belts should not be worn or torn, and plastic buckles and fasteners must be sturdy, free
of damage and secure.
The harness may be used in two height levels. Unfasten the belt, remove the soft shoulder pad and
thread the belt through the desired height level.
12 – LEG REST ADJUSTMENT
Press simultaneously the buttons on both sides of the leg rest and move it from higher to lower position.
Push up the leg rest in order to lift it in higher position.
13 – ROTATING THE SEAT AT 360 °
А
– Position the leg rest in the highest position.
В
– Adjust the backrest in most upright position.
С
– Pull the rotating level under the seat.
D
– You can turn the seat at 360°.
14 – ROTATED SEAT
15 – CANOPY ADJUSTMENT
Push or pull with your hand to fold or open the canopy.
Unzip the additional section of the canopy in order to make it bigger.
FUNCTIONS