3
Tools needed:
screwdriver, used to insert and remove batteries. To complete assembly of swing you
do not need to use tools.
The assembly actions are numbered from 1 to 12. Use their descriptions below along with the illustration
with the same number.
1 – ASSEMBLY OF SEAT TUBE TO BACKREST TUBE
Place the seat tube to the connecting elements of the backrest tube and press until pins show out of the
openings and you hear a click sound.
2 – ASSEMBLY OF SIDE SUPPORTS OF ROCKER
Place each of the side supports to corresponding connecting elements of backrest tube and press until
pins show out of the openings and you hear a click sound.
3 – ASSEMBLY OF REAR SUPPORT OF ROCKER
Place the sear support to both side supports and press until pins show out of the openings and you hear
a click sound.
4 – PLACING THE FABRIC COVER
5 – ASSEMBLY OF FOOD TRAY
5a – Fix the protective bar with 4 screws. Use screwdriver.
5b – Place the tray to the corresponding openings at the connecting elements and press.
5c – You will hear a click sound.
To remove the tray, press the buttons at both sides and pull it out.
6 – UNFOLDING OF SWINGING MECHANISMS
Open the tubes at the swinging mechanisms, as it is shown in the figure.
NOTE:
To open the swinging mechanisms, press the buttons and set the tubes inwards.
7 – ASSEMBLY OF LEFT AND RIGHT SWINING MECHANISMS TO THE LEFT AND RIGHT SUPPORTS
NOTE:
Make sure all pins have shown through the openings.
8 – SEAT ASSEMBLY
Press the button and insert both endings of the seat into shoulders of the swinging mechanisms, so that
the profiles of shoulders and openings of seat/rocker match.
Make sure the seat is securely fixed as trying to pull the endings from the axis of swinging mechanisms.
To remove the seat/rocker, press the buttons at both sides and pull the seat/rocker from the shoulders.
IMPORTANT!
Follow exactly the guidelines and the sequence of steps for product assembly and use
which you will find in the figures in this manual.
CAUTION!
After completing each step, check that fixing is secure!
CAUTION!
Fixing in certain position is most of the times accompanied with a click!
CAUTION!
Make sure all pins have shown through the openings.
ASSEMBLY INSTRUCTIONS
