click
1
2
3
CAUTION!
FOLLOW EXACTLY THE GUIDELINES AND THE INSTRUCTIONS REGARDING
ASSEMBLY AND USE WHICH YOU WILL FIND IN THE FIGURES IN THE MANUAL.
CAUTION!
AFTER EACH STEP, CHECK THAT FIXING IS STABLE!
Tools needed for some assembly steps: screwdriver (not included in the set).
Assembly steps and functions are numbered from 1 to 12. Use their descriptions below along with the
figure of the same number.
PUSHING THE CAR BY AN ADULT
1 – ASSEMBLY OF LOCK AND STEERING WHEEL TO THE BODY OF CAR.
2 – ASSEMBLY OF BACKREST TO BODY OF CAR.
3 – ASSEMBLY OF PROTECTING BARS.
Attach the protection bars to the backrest using the pins (a). Rotate and insert the bars (b) into the lock.
4 – ASSEMBLY OF THE PARENT HANDLE PARTS.
5 – ASSEMBL OF THE PARENT HANDLE TO THE BODY OF THE CAR.
6 – ASSEMBLY OF CUP HOLDER.
Use the fasteners „М” and a screwdriver (not included in the set), to fix the cup holder to the parent
handle.
7 – ASSEMBLY OF THE FOOT REST.
8 – ASSEMBLY OF THE CANOPY TO THE BACKREST.
Note:
Make sure that canopy is properly and securely fixed!
RIDING THE CAR BY THE CHILD
To be able the child to ride the car by pushing it with his/her feet, you have to remove the canopy, parent
handle, protection bars and foot rest.
9 – REMOVING THE CANOPY AND PARENT HANDLE.
Press the buttons (fig. 9) and pull out the canopy and parent handle.
10 – REMOVING THE PROTECTING BARS.
11 – REMOVING THE FOOT REST.
12 – CAR READY FOR RIDING.
ASSEMBLY GUIDELINES AND FUNCTIONS
ASSEMBLY
