1.Power switch: Turn on or turn off the power.
2.Light switch: I is turn on, O is turn off.
3.Music button: press the button to play music.
4.Horn button: press the button to play the horn.
5.Forward/Reverse switch: press the button for controlling the Vehicle to move
forward, reverse.
6.Mp3 multifunctional player
6
Forward
Reverse
3. Instruction of each switch and function button
+
-
+
-
LED Indicator
1
Use a screwdriver to remove the battery cover of the remote control, insert
two AAA 1.5V dry batteries in correct polarity. Close the battery cover and
fix it with the screw. (Battery replacement also according to the above
steps)
2
.
Matching the frequency of car and remote control
1.All batteries should be inserted in the correct polarity.
2.Non-rechargeable battery cannot be recharged
3.Take out and properly deal with the dead battery. To avoid injury, please
keep kids away from the battery.
4.The direct contact between the positive and negative terminals may result
in fire or explosion. Avoid direct connect between the terminals.
5.Do not mix old and new batteries. DO not mix alkaline, standard(carbon-
zinc),or rechargeable(nickel-cadmium) batteries.
6.Only an adult who has read and understood the safety warnings can
recharge the battery.
4. Once the matching is made, there is no need to match code again
only if the battery is replaced.
5. The Remote Control will enter a sleep mode if not used for a long time
and the LED indicators will be off. Press any buttons to wake up the
Remote Control, and it can be used normally.
Button Description: ▲: forward ▼: reverse
◀
: turn left
▶
: turn right
S: Speed P:emergency brake, press it and the running function will fail,
press again, it release.
Press
▼
reverse button, the car goes reverse.
Press the P button to brake the car urgently. Press P button again to
release the brake system. Press the turn left button, car turn left, Press the
turn right button, car turn right,
The S button is speed button, one light on is low speed, two lights on for
intermediate speed, three lights on for high speed.
1. Turn off the Power Switch on the car.
2. Remove the battery cover on the Remote Control and put in 2 AAA
battery, the three LED indicators will flash.
3. Turn on the Power Switch on the car, when the LED indicators stop
flashing and 2 of them are on, matching successes.
Remote control operating instruction
Remote control is priority (when the car is in Remote control, the remote
control personnel can control the car forward and backward, high/Low
speed, steering and other functions, the driver CAN NOT operate the car).
Press the ▲ forward button, the car goes forward.