3
ASSEMBLY INSTRUCTIONS AND FUNCTIONS
ASSEMBLY
This stroller is supplied partially assembled. In order to complete the assembly, you don’t need any
tools.
IMPORTANT!
Follow exactly the instructions given and check the pictures. Keep your hands from
entrapment!
IMPORTANT!
After each operation, make sure that you have followed the instructions correctly and the
fixing is stable!
IMPORTANT!
In most cases after the completion of an operation you will hear a clicking sound.
The assembly, disassembly and functions are numbered from 1 to 16. Use the operations descriptions
given in this manual and their matching picture.
1 – FRAME UNFOLDING
2 – INSTALLATION AND REMOVAL OF REAR WHEELS
3 – INSTALLATION AND REMOVAL OF FRONT WHEELS
4 – INSTALLATION AND REMOVAL OF SEAT UNIT
5 – INSTALLATION AND REMOVAL OF BUMPER
Note:
To remove the front bumper press the buttons on both sides and remove the bumper.
6 – INSTALLATION AND REMOVAL OF CANOPY
CAUTION!
Always attach the canopy at the back of the seat in order to prevent the child from sliding
off and injury.
FUNCTIONS
7 – SWIVEL AND STRAIGHT MOTION OF FRONT WHEELS
IMPORTANT!
When using the stroller on uneven surfaces, fix the wheels for straight movement only.
8 – PARKING DEVICE
9 – HANDLE HEIGHT ADJUSTMENT
9-1 – Press
9-2 – Move in the desired position.
Note:
The fixing of each position is accompanied with the sound “click”.
10 – CANOPY ADJUSTMENT
11 – SEAT POSITION ADJUSTMENT
12 – RESTRAINT SYSTEM (5-POINT SAFETY HARNESS)
CAUTION!
Belts must be snug to child’s body and must not be twisted.
IMPORTANT!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The seat belt straps must not be damaged, worn out or twisted.
13 – STROLLER FOLDING
IMPORTANT!
Before folding the stroller, activate the parking device, the seat must be forward facing
and front wheels must be in swivel function, the canopy must be closed and storage basket should be
empty.
After folding, attach the transport hook.
14 – TRANSFORMING THE COT INTO SEAT
15 – TRANSFORMING THE SEAT INTO COT
Unfasten the belts on bottom side of the seat.
CAUTION!
When the seat is in carry cot mode, it must be in rearward position – child facing the mother.
IMPORTANT!
When the seat is transformed in carry cot, always remove the harness or tuck them the
sides of the seat and cover them with a pad/mattress/ with thickness up to 20 mm.
16 – INSTALLATION AND REMOVAL OF CAR SEAT “CAMEA” ON FRAME OF STROLLER CAMEA.
The car seat is installed on the frame of this stroller using adaptors.
Press the corresponding red button on top side of car seat and insert:
- Adapter marked „R” on the right side of car seat (when you are facing the car seat)
- Adapter marked „L” on the left side of car seat (when you are facing the car seat)
