3
2 – ASSEMBLY OF FRONT WHEELS
Attach the front wheel to the front axle of the frame, following the direction of the arrow marked on the
wheel. Press until you hear a “click” sound. Make sure the wheel is locked as you try to pull it off the axle.
3 – ASSEMBLY AND REMOVAL OF REAR WHEELS
Press the K pins and insert the rear wheel assembly into the rear tubes (I) of the frame. The pins must fit
into the holes of the tubes to make the rear wheel set fixed. When fixing, you will hear a clicking sound.
To remove the wheels, press the “K” pins and pull the rear wheel assembly out of the frame tubes.
4 – ASSEMBLY AND REMOVAL OF THE FRONT TRAY
To remove the front tray, press the buttons for removal on the underside of the tray and remove from
the frame.
5 – SWIVELING AND STRAIGHT MOTION OF FRONT WHEELS
IMPORTANT!
When using the stroller on uneven surfaces, fix the front wheels for straight motion.
6 – LEG REST
The leg rest can be adjusted in two positions. Press simultaneously the both thumbs and place in don
position.
For moving in upper position, push the leg rest with hand upwards.
7 – PARKING DEVICE
Press down the parking device to activate it and stop the stroller.
Lift up the parking devise to release it and the stroller to move again.
CAUTION!
Always engage the parking device, when the stroller is stationary to avoid the risk of slipping
of the stroller!
8 - ADJUSTING THE POSITION OF THE BACKREST
CAUTION!
BABY UNDER 6 MONTHS TO BE PLACED ON THE SEAT ONLY WITH THE BACKREST,
ADJUSTED IN THE MOST RECLINED (FLAT) POSITION!
9 – CANOPY AND CUP HOLDER
Push with hand to fold the canopy (1). Pull the canopy to open it (2).
CAUTION!
Always attach the canopy to the backrest to prevent the baby to fall and injure!
Attach the cup holder to the handle of the stroller and press, until you hear clicking sound.
10 - RESTRAINT SYSTEM (safety belts).
10-1 – Unfastening of the safety belts;
10-2 –Fastening of the safety belts.
Adjust the length of the shoulder straps, waist belts and the crotch belt by beans of buckles.
Remark:
Belt must be snug to child’s body and must not be twisted
CAUTION!
Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
FUNCTIONS
