M4
1.2 N.m
Use hard wire or
soft wire for a single
connection.
One terminal can
connect up to two
conductors with
same sectional area
and type
8
m
m
8
m
m
2×
0.5 2.5
~
2×
0.5 2.5
~
03
Table 3 Wire selection and tightening torque
Figure 2 Installation diagram of NP3 pushbutton
2
mm
2
mm
3) Installation procedure and method
Pass the cable through the rubber sealing sleeve and fix the rubber
sealing sleeve with end cap (1), then secure the wires onto the terminal of
each button one by one according to the electrical drawing; install the
bottom cover and tighten the screws (2), as shown in Figure 2.