1. Disclaimer
Thank you for purchasing the T18 hand-held remote-control station. Please use it
in accordance with local radio control regulations and read this statement
carefully before using it. Once used, it shall be deemed to endorse and accept all
contents of this statement. Please strictly follow this instruction to install and use
the product. The supplier will not bear any legal liability for any result or loss
caused by improper use, installation, final assembly or modification of the
product.
2. Product Precautions
1. Be sure to power on the GCS before starting the drone.
2. When switching between left and right handed mode, disconnect the remote
control from the aircraft first.
3. Turn the antenna sideways to the drone to ensure a stable signal when
performing tasks.
4. In the operation, be sure to handle it gently to avoid damage.
5. Do not disassemble the product, otherwise the product cannot be under
warranty.
6. Please use soft fabric for dust cleaning after the operation.
7. When not in use, please store the product in an EVA foam packing box in a cool
and dry environment.
8. Please keep it away from flammable and explosive materials as there is a built-
in lithium battery.
9. In order to serve our customers better, our R & D team has been upgrading and
optimizing the product, the corresponding software and firmware will be updated
from time to time, there may be incompatibility between the different firmware
versions of the ground unit and the airborne unit, so please check the software
firmware version when using. Please refer to our website for the latest firmware
and technical support.
10. If you encounter any insurmountable problems during the installation or the
operation of the product, please contact us or visit our website:
www.chinowing.com for the support.
