Chinook K Series, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 7 / 34

If necessary, tighten the nuts with a calibrated dynamometric
wrench, adjust conrod-crankshaft coupling with light hammer
blows. After that, tighten the nuts again with the dynamometric
wrench; the conrod must be able to rotate freely (see Table A).
Fit the conrods onto the crankshaft after placing the latter into its crankcase (see section 1 page 3); once
you have completed the tightening process, screw theoil spash pins into their housing and fasten them
with a special adhesive.
7
8
-K 9