Chino KR2S, Инструкция по эксплуатации

Страница: 3 / 128

INST.No.INE-863B KR2S
【
Communication Interface
】
Instruction Manual
-1-
Introduction
This manual describes the specifications and operation of three communications interfaces (RS-485 and
Ethernet) of the KR2S series graphic recorders.
The individual part for each communication is explained separately in [In case of RS-485] and [in case of
Ethernet], and the common part is explained all together. Please read the required part carefully. Be sure
to confirm the model code of the communications interface of this unit you purchased.
KR2S
□□‐□□□
Communication interface (option)
N: None
E: Ethernet
R: Low/high order communications (RS-485)
G: Et low/high order communications (RS-485)

Other manuals to be consulted
This manual is for the communications interface only. For the installations of this instrument, please
refer to the following separate manuals:
1) KR2S General Manual (Manual No. INE-861
□
)
2) KR2S [Wiring/Installation] Instruction Manual (Manual No. INE-862
□
)
3) SC8-10 Line Converter (Manual No. INE-39)
* For the personal computer (PC) you use, refer to the manual attached to the PC.

Caution display
The cautions to be observed for preventing the damage of this instrument and unexpected accidents
are sorted by the following symbols according to their importance degrees for enabling operators to
use this instrument safely.
Caution
The nonobservance of information under this symbol may result in a
hazardous situation or a light injury to the user or in physical damage to the
property.
Remarks
This symbol shows a caution when the instrument dose not function as specified or
when such a possibility exists.
Important notes for users
1. No part of this manual can be reproduced or copied in any form without permission.
2. The contents of this manual may be altered without prior notice.
3. This manual has been documented by making assurance doubly sure.
However, if any question arises or if any error, an omission, or other deficiencies are found,
please contact your nearest CHINO’s sales office.
4. CHINO is not responsible for any operation results of this software.
！