chinesport Anchor Series, Руководство по эксплуатации продукта

Страница: 6 / 8

6
www.chinesport.it
RIFTON ANCHOR FAMILY Product manual
6
Operation
Anchors work best on a clean, smooth
table or tray. The surface must be very
smooth and completely clean to get a
strong seal. If suction cup does not hold
well, wipe with a damp cloth or apply a
thin layer of petroleum jelly around the rim
of the rubber pad to enhance the vacuum.
To tighten the hand Anchor and the wrist
Anchor, press down on the suction cup and
turn handhold clockwise until secure. Turn
handhold counterclockwise to remove (see
Figure 6a).
The other Anchors are tightened by
pressing down on the suction cup and
moving the lever down (see Figure 6b).
Lift the lever to remove.
Figure 6a
Figure 6b
Maintenance
This product is designed and tested for an expected life of 5 years when used and
maintained in accordance with this manual. At all times, users must ensure that the
product remains in a safe and useable condition, including regular maintenance and
inspections as specifi ed in the manual.
To prevent structural failure, which may result in serious injury or death:
• Inspect this product and accessories regularly for loose or missing screws, metal
fatigue, cracks, broken welds, missing attachments, general instability or other signs of
excessive wear.
• Immediately remove this product from use when any condition develops that might
make operation unsafe.
• Do not use Rifton components or products for any purpose other than their intended
use.
• Replace or repair components or products that are damaged or appear to be unstable.
• Use only Rifton authorized replacement parts. Order information for replacement parts
is provided on the back of this product manual.
6
Operation
Anchors work best on a clean, smooth
table or tray. The surface must be very
smooth and completely clean to get a
strong seal. If suction cup does not hold
well, wipe with a damp cloth or apply a
thin layer of petroleum jelly around the rim
of the rubber pad to enhance the vacuum.
To tighten the hand Anchor and the wrist
Anchor, press down on the suction cup and
turn handhold clockwise until secure. Turn
handhold counterclockwise to remove (see
Figure 6a).
The other Anchors are tightened by
pressing down on the suction cup and
moving the lever down (see Figure 6b).
Lift the lever to remove.
Figure 6a
Figure 6b
Maintenance
This product is designed and tested for an expected life of 5 years when used and
maintained in accordance with this manual. At all times, users must ensure that the
product remains in a safe and useable condition, including regular maintenance and
inspections as specifi ed in the manual.
To prevent structural failure, which may result in serious injury or death:
• Inspect this product and accessories regularly for loose or missing screws, metal
fatigue, cracks, broken welds, missing attachments, general instability or other signs of
excessive wear.
• Immediately remove this product from use when any condition develops that might
make operation unsafe.
• Do not use Rifton components or products for any purpose other than their intended
use.
• Replace or repair components or products that are damaged or appear to be unstable.
• Use only Rifton authorized replacement parts. Order information for replacement parts
is provided on the back of this product manual.
6
Operation
Anchors work best on a clean, smooth
table or tray. The surface must be very
smooth and completely clean to get a
strong seal. If suction cup does not hold
well, wipe with a damp cloth or apply a
thin layer of petroleum jelly around the rim
of the rubber pad to enhance the vacuum.
To tighten the hand Anchor and the wrist
Anchor, press down on the suction cup and
turn handhold clockwise until secure. Turn
handhold counterclockwise to remove (see
Figure 6a).
The other Anchors are tightened by
pressing down on the suction cup and
moving the lever down (see Figure 6b).
Lift the lever to remove.
Figure 6a
Figure 6b
Maintenance
This product is designed and tested for an expected life of 5 years when used and
maintained in accordance with this manual. At all times, users must ensure that the
product remains in a safe and useable condition, including regular maintenance and
inspections as specifi ed in the manual.
To prevent structural failure, which may result in serious injury or death:
• Inspect this product and accessories regularly for loose or missing screws, metal
fatigue, cracks, broken welds, missing attachments, general instability or other signs of
excessive wear.
• Immediately remove this product from use when any condition develops that might
make operation unsafe.
• Do not use Rifton components or products for any purpose other than their intended
use.
• Replace or repair components or products that are damaged or appear to be unstable.
• Use only Rifton authorized replacement parts. Order information for replacement parts
is provided on the back of this product manual.