www.tsicustomerservice.com
A615
6
OPERATION INSTRUCTIONS
FUNCTION
POWER
The power button supplies power to all of the functions
of the lantern. The power button will also put the lantern in a
standby mode. This will turn off all functions at once but
will hold the settings in the memory. By pressing the
Power button again the unit will turn on at the same
settings.
With the power on, press and hold the Power button on the
control panel for 10 seconds. This will disable or re-enable the
heater function. Once disabled or re-enabled, the Candlelight
and Heater indicator lights will flash multiple times.
Pressing the downlight & uplight button will turn on/ off the
downlight and uplight.
Turn the thermostat knob clockwise to increase the room
temperature.
DOWNLIGHT & UPLIGHT
THERMOSTAT
ICON
DESCRIPTION
Pressing the HEAT button will cycle through 1000W, 1500W
and OFF settings.
HEATER
6 light levels can be selected:
Setting 1 -3 decrease in brightness with flickering;
Setting 4 -6 decrease in brightness without flickering.
CANDLELIGHT
