SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
22
If you use static mode, you need set it.
IP Address
Input the IP address distributed to you.
Netmask
Input the Netmask distributed to you.
Gateway
Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which you inputted can not be
parsed, phone will automatically add this domain to the end of the domain
which you inputted before and parse it again.
Primary DNS
Input your primary DNS server address.
Alter DNS
Input your standby DNS server address.
If you uses PPPoE mode
，
you need to make the above setting.
PPPoE Server
It will be provided by ISP.
Username
Input your ADSL account.
Password
Input your ADSL password.
Notice:
1
）
Click “Apply” button after finishe your setting, IP Phone will save the setting automatically and new setting will
take effect.
2
）
If you modify IP address, the web will not response by the old IP address. Your need input new IP address in
the address column to logon in the phone.
3
）
If networks ID which is distributed by DHCP server is same as network ID which is used by LAN of system,
phone will use the DHCP IP to set WAN, and modify LAN’s networks ID(for example, system will change LAN IP
from 192.168.10.1 to 192.168.11.1) when phone uses DHCP client to get IP in startup; if phone uses DHCP
client to get IP in running status and network ID is also same as LAN’s, phone will refuse to accept the IP to
configure WAN.
4.3.2.2. LAN Config
