2 FXS Sip/IAX ATA User Guide
陈泽科技有限公司
www.stephen-tele.com
Default Protocol:
Set the Line1 default protocol when dialing out.
SIP Switch
: Enable or disable this line’s register of SIP account.
SIP Dial plan
: Set the sequence of this line’s dial plan for SIP protocol.
SIP Parameters
: Configure the SIP account information.
Username
: Username of your SIP account (Commonly the same as the phone number).
Display Name
: The display name sent to callee, if sip provider doesn’t send a caller ID, this will be shown on the LCD of callee. (Need
Server Support)
Auth name
: Commonly the same as the phone username.
Password
: Password of your SIP account.
Server Addr
.: Register address of SIP server and port.
Realm/Domain
: SIP domain, which is provided by SIP server. It can be the server IP or the domain name of the server, or other
identifier provided by the server.
Proxy Require
: Some SIP service need this parameter.
Register Interval
: SIP register expires time. The will auto configure this expire time to the server recommended setting if it
is longer from the SIP server.
Heartbeat Interval
: Send heartbeat pack periodically to keep the channel.
Options Interval
: Send option signal to SIP server periodically to detect if the SIP server is available.
SIP DTMF Parameters
: DTMF signal sending mode and pay load. Support Inband, RFC2833 and Info.
SIP Codec PRI
: Setting the prefer codec in order. Support G729, G723, PCMU (G711u), PCMA (G711a),.
