SON8016U GEPON ONU User Manual
陈泽科技有限公司
www.stephen-tele.com
6.
As
above
method,
upgrade
”app”,
“pers”
in
turn.
Input”rxapp”
order
while
upgrade
“app”
choose”App3713_Rxxx_SPI_8Mb.tkf” file, input “rxpers” order when up grade “pers”, choose”Pers3713_RXXX.tkf” file.
7. After finishing the upgrade. Pls restart ONU to check if the status is ok or not..
Chapter 5. Annex
(100M 5 port management methods -optional)
ONU No. 2 to No. 6 RJ45 port is 100M port.
This five-port management is a choice, if you did not choose this management functions, machines will be
working in accordance with the default mode.
ONU five of the port management 100M There are two ways:
The first one: with OLT connected computer directly on the importation of this five-port management chip
address (192.168.0.100) into the management interface.
The second: 100 M arbitrary port through a network of computers connected with the computer input
management chip address (192.168.0.100) to enter management interfac
e.
Please refer to attached document for the details.
5.1 Software Introduction
The switch is Web based management basic on IP address. Firstly. Please set an IP address for PC according to switch’s
default IP address
，
and make sure the switch and PC must be in the same gateway. Please open web browser,
input the switch IP address, for example
：
http://192.168.0.100, and input the user’s name and password
（
default user’s name is “admin”
，
Password is “1234”
）
, then you might enter into the management interface.
