![Chiltern Invadex TRT1 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/chiltern-invadex/trt1/trt1_user-manual_2601695005.webp)
2
Shower Trolley Operation
1
Position the shower trolley near to the showering facility and locate the outlet pipe into a
suitable waste.
2
Prior to use, inspect the shower trolley for signs of distortion on the cot sides or latches.
If the item is damaged it should be considered unsafe and replaced. The shower trolley
itself must not be used if there is any sign of damage.
3
The trolley is designed to be angled to allow water run off through the outlet pipe. To
ensure that water does not congregate around the users head, ensure that the liner is
inserted correctly. (ie that the outlet pipe is located at the lower end of the trolley when
the trolley is raised.)
4
Ensure that the brakes are in the ON position prior to attempting any transfer and remain
ON whilst the trolley is occupied.
5
Position the trolley bed to its lowest position by depressing the down foot pedal or the
down button on the hand control for the electric (TRT4) model.
Note:
the lower speed has been carefully set
to
provide a safe and controlled lower
speed. Application of force to the top of the cot side in an attempt to increase the speed
can result in serious damage to the cot side and the actuator.
6
Pull the latch lever down to release the cot side.
Note:
cot sides lower on both sides of the trolley, where one side of the trolley is
unattended the latch must be checked prior to use to ensure that it is secure and will not
release during use (see page 3).
7
Unclip the poppers on the corners of the liner and lay the liner flat.
8
Position the bather onto the shower liner.
Note:
prior to attempting any transfer the action should be planned and prepared.
9
Refix the shower liner corners and reposition the cot side.
Note:
ensure that latch locks securely into place. (see page 3)
10
Raise the trolley to a suitable height by depressing the up pedal or the up button on the
hand control for the electric (TRT4) model.
11
Proceed with bathing.
12
When bathing is complete remove the bather by repeating operations 5-8 in reverse
13
Where the shower trolley is to be used by multiple bathers it is strongly recommended
that the trolley is cleaned after each use using a medical disinfectant (see page 4)
14
The TRT4 electric actuator should be charged in accordance with the instructions on
page 4.
A wall poster showing user instruction is available upon request to
Never leave a user unattended in the shower trolley
Содержание TRT1
Страница 2: ......