CHILDCRAFT Crib'N'Double 31001, Руководство по сборке, Страница: 5 / 14

5
s
teP
4 - D
iagram
4: a
ttaCHiNg
s
Hort
H
eaD
a
ssembly to
s
tatioNary
s
iDe
a
ssembly
Attach Short Head Assembly
N
to Stationary Side Assembly from Step 1. Allenhead Bolts
F
will be installed through receiving holes in
the end rail of Short Head Assembly
N
and threaded into the metal inserts installed in Stationary Post - Left
S
. A total of two (2) Allenhead
Bolts
F
are required.
Repeat this step to attach Short Foot Assembly
M
to Stationary Post - Right
T
.
s
teP
5 - D
iagram
5: i
NstalliNg
l
oNg
F
oot
a
ssembly
D
S
T
Allow dowel pins on both ends of Long Foot Assembly
L
bottom rail to enter hole in posts
Q
and
R
. Joint Connector Nuts
H
will be installed
in the bottom edge of both the top and bottom rail of Long Foot Assembly
L
as each of the following bolts are installed ( NOTE: Install
unslotted end of Joint Connector Nuts
H
into hole first). Insert Allenhead Bolt
D
through bottom hole in Foot Post
Q
and
R
and into bottom
rail of Long Foot Assembly
L
and thread into Joint Connector Nut
H
as described in Step 1. Insert Allenhead Bolt
C
into the top hole and
also thread it into a Joint Connector Nut
H
. Tighten all bolts securely. A total of two (2) of Bolts
C
and two of Bolts
D
will be used with four
(4) Joint Connector Nuts
H
during this process.
Stationary Side Assembly
from Step 1.
Z
Short Foot Assembly from
Step 3 (this part is shown
after installation).
M
N
Short Head Assembly
from Step 3.
NOTE: Allenhead Bolt
D
is longer than Allenhead
Bolt
C
.
C
Insert dowel on end of
bottom rail of Long Foot
Assembly
L
into post
Q
and
R
.
Threaded Insert
F
H
H
F
L