www.childcareproducts.com.au
www.childcareproducts.com.au
3
6
Assembly Instructions
To Open the Stroller
•
Release upfold lock on
centre handle and detach
upfold lock from leg.
•
Hold the handles and allow
the stroller to open out.
•
Push the footplates fully
down to lock the primary
and secondary lock.
Wheel Assembly
•
Place wheel assembly on
stroller leg. Ensure that the
larger hole on the swivel
housing is pushed
on first (see arrow on swivel
housing).
•
Push until wheel clicks into
position.
•
Pull back on wheel assembly
to ensure it is securely attached.
Brakes
•
Apply rear wheel brakes by
pushing down individually on
each lever with foot.
•
Ensure all brakes are applied
when parking stroller.
•
Release by lifting lever with
foot.
Folding the Stroller
• Close the hoods.
• Return seats to upright position.
• Lift locks with your foot and lift
upwards to disengage.
• Push down on the secondary
safety lock with your foot.
• Push handles forward until
folded down and manually
engage the folding lock.
Warning
: Always apply brakes when
parking the stroller.
Attaching the Hood
•
Attach hood onto handle frame
above the main folding elbow.
•
Fasten the rear section of the
hood onto the handle by the
velcro strap.
