ASSEMBLY / OPERATING INSTRUCTIONS
To remove Inner Tray...
To store Tray...
To assemble Harness...
d
a
c
b
1
1
1
2
To remove the inner tray pull the two side clips
outwards on both sides of the tray.
Release the rear clip of the inner tray and lift the tray
upwards.
To refit the inner tray place over the tray and push
down on the outer clips until the inner tray locks into
place.
When not in use, the tray can be clipped to the rear
legs of the highchair.
Place the tray on the legs as shown.
Line up the slots on the underside of the tray to fit into
the holes on the legs.
Once fitted, push the tray down to lock it into place.
To remove the tray, lift the tray upwards and pull the
tray away from the legs.
A five point harness is provided to restrain your child.
To fasten the harness push the waist strap clips into the
buckle until they lock in place (b).
Sliding adjusters are fitted on the shoulder straps and
waist straps (c).
To unfasten push the button on the buckle (a) and
pull the clips clear.
The harness should be carefully adjusted so that it fits
your child comfortably.
To adjust the shoulder strap height or to remove the
harness, remove the metal ring, flatten the butterfly
ends and pass through the slots in the seat (d).
To refit the straps, flatten the butterfly ends, pass the
ends through the slots in the seat then open the
butterfly ends out (e) and refit metal ring.
1a.
1b.
1c.
1a.
1b.
1c.
1d.
1e.
1a.
1b.
1c.
1d.
2a.
2b.
2c.
e
d
CAUTION!
The harness must be used at all times and be correctly adjusted. Most
injuries from high chairs are caused by falls.
8
