ASSEMBLY / OPERATING INSTRUCTIONS
To install Safety Gate (continued)...
A
A
C
C
B
B
B
B
A
A
C
C
B
B
B
B
A
A
C
C
B
B
B
B
A
A
C
C
B
B
B
B
3
4
5
Spindle attachment is different when using extensions
and when not using extensions.
Spindle housings are not used if square extension
tubes are required, If the housings have been inserted,
remove with a screwdriver.
If no extension/s are used, slide
top spindles (A) and bottom
spindles (C) into spindle
housing end (B).
Push assembly into gate
corners.
If using extension/s, insert square extension tubes (f)
into gate ends.
Connect extension bar (g) to one upper extension
housing (d) and one lower extension housing (e).
Push assembly over extension tubes.
There should be no metal showing from extension
tubes.
It may be necessary to apply pressure to tubes to
ensure they are fully inserted into gate ends.
Slide top spindles (a) and bottom spindles (c) into
extension tubes.
3a.
3b.
4a.
4b.
5a.
5b.
5c.
5d.
5e.
5f.
