www.childcareproducts.com.au
www.childcareproducts.com.au
A-
1
Power LED
-----------------------------------------
A-2
IR LED------
----------------------------------------
A-3
Camera lens------------
--------------------------
A-4
Brightness sensor
-------------------------------
A-5
Microphone--------------------------------
--------
A-6
Channel 1-2-3
------------------------------------
A-7
Power on/off---------------------------------------
A-8
DC Power (9V)----------
--------------------------
A-9
Wall hook hole-----------------
------------------
T R A N S M I T T E R U N I T ( B A B Y ’ S U N I T )
lights when unit is switched on.
select channel 1, 2 or 3 (whichever
has less interference).
power input socket.
can be mounted to a wall.
A
high-sensitivity microphone.
3
10
A
7
Problem Solving
Problem
Possible Cause
Receiver’s Unit
has no sound /
picture or static
Receiver is not turned on.
Volume is too low.
Channel switches are not
on the setting (1,2 or 3).
Signal interference due to
microwaves, monitors,
mobile or cordless
telephones, etc...
Out of range.
Turn Receiver on at the
side of the Receiver’s Unit.
Adjust the volume control
on the Reciever’s Unit.
Check the channel
switches on the
Transmitter’s Unit and
Receiver’s Unit to confirm
they are on the same
channel (1,2 or 3).
Try one of the other
channels.
Bring Receiver’s Unit
closer to Transmitter’s
Unit.
Power/low battery
indication is amber
Receiver’s Unit is not
turned on.
Turn the volume on/off
the side of th Receiver’s
Unit to the ON position.
Solution
Transmitter (baby’s unit)
If you are experiencing a problem with your monitor do not return the unit to
your point of purchase, please contact us on: 1300 667 137 for any
assistance and after sales service.
Batteries are low.
3
1
2
4
5
6
8
9
Recharge batteries.
Batteries too low/are
dead/Power is turned off.
Charge battery / Make
certain that any light
switches that control
the power flow to the
wall outlet are on (when
using AC). If batteries
are dead, replace
batteries.
AC Adapter not properly
connected.
Check AC Adapter
connections.
Receiver’s Unit
power indication
not on
high-sensitivity camera lens.
automatically switches on night
vision in the darkened room.
switches off power to the unit.
Infra-red night vision sensors.
