ASSEMBLY / OPERATING INSTRUCTIONS
To fit Leg Base Mouldings...
1
2
3
4
Locate the two rear upper legs.
Line up the screw and the hole and turn clockwise
until the leg is firm.
Do not over-tighten.
Repeat for opposite side.
The chair should resemble the image as shown.
Locate the four bottom legs.
Line up the screw and the hole and turn clockwise
until the leg is firm.
Do not over-tighten.
Repeat for remaining three legs.
Rotate the feet located at the end of the bottom legs.
Ensure the feet are rotated to sit flush to the surface
before use of the high chair.
1a.
1b.
1c.
1d.
2a.
3a.
3b.
3c.
3d.
4a.
4b.
