Childcare 044282-351, Руководство пользователя

Страница: 6 / 8

11 10
Assembly / Operating Instructions
Adjusting the seat height and reline Removing the seat cushion for cleaning
Folding the high chair
Assembly / Operating Instructions
Note: Do not adjust the height of the seat whilst the child is seated in the chair. To adjust the height
of the seat push in both of the height adjusing locks (a) and simultaneously raise or lower the seat,
releasing both of the locks at the required height. To adjust the angle of the seat, lift the plastic lever
(b) (found on the back of the seat assembly) and position as required, releasing the mechanism to
secure into place.
Important: If the height adjustment becomes difficult after a period of use and as part of the
regular mainenance routine, DO NOT use spray lubricants, simply wipe clean after use.
1. Feed the harness straps throught the slots in seat and seat cushion on the back and under th
seat (a) and remove the harness.
Release the seat cushion on either side of the arm rests by pulling the press studs from the
inner armrests (b).
2. Lift the cover off the seat (c).
Refitting the seat cushion is a reversal of this procedure. When refitting the harness ensure
the butterflies on the ends of the harness straps are opened out correctly (d).
For a more compact fold to fit the tray to the back of the high chair. To fold push in both of the
height adjustion locks (a) and simultaneously lower the seat of the high chair to position 6, press in
both of the releasse catches (b) on the side legs and slide the rear legs forward.
Check the high chair is correctly folded in
its locked position before leaving to stand
free.
b
b
a
a