6
D
IRECTIONS
FOR
C
ONVERTING
“C
RIB
”
TO
A
“D
AYBED
”
When use as a crib has been completed, by removing the
Dropside, you have the option to convert to a daybed for years of
additional use in your child’s room. Refer to Step 6 - Diagram 6
and follow directions in reverse order. Store the removed parts
and hardware in the event you wish to convert your daybed back
to a crib. Refer to Sketch A.
WHENEVER DISASSEMBLING YOUR CRIB, DO NOT REMOVE ANY
ITEMS ATTACHED WITH WOOD SCREWS
A
A
A
A
A
OR
E
E
E
E
E
!
Sketch A
(style may vary)
MAINTENANCE OF YOUR CHILD CRAFT CRIB/DAYBED: Upon completion of assembly be sure all screws, bolts and
fastening devices have been tightened securely. A frequent check should be made of all screws, bolts and fastening devices
and tightened if needed. Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use crib if parts are missing or broken. Contact your Dealer or Child Craft (812) 883-3111, for a
replacement part or instructional literature if needed. Include Model Identification Number with your request which you
recorded on page 1 of these instructions. DO NOT SUBSTITUTE PARTS. DO NOT MAKE ANY ALTERATIONS NOT
DESCRIBED IN THESE ASSEMBLY DIRECTIONS.
CLEANING INSTRUCTIONS FOR YOUR CHILD CRAFT CRIB/DAYBED: Mix together a mild solution of gentle dishwashing
liquid and water, apply to surface using a soft clean cloth lightly dampened in the solution. Rinse with clear water again using
a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS,
STEEL WOOL, OR COARSE RAGS SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE AND USE OF YOUR CHILD CRAFT CRIB/DAYBED: A printed plastic pouch is attached to the crib spring for the
permanent storage of the assembly directions. After completing the assembly process you are advised to read and be aware
of all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE notices contained in this set of direc-
tions and printed on the plastic pouch located on the underneath side of the crib spring. You will then place the complete set
of assembly directions into the plastic pouch for future referral. We caution you not to place excess hardware in the plastic
pouch as it could present danger to a child if retrieved. When storing crib use CAUTION as extreme temperature or humidity
changes could be harmful. Use CAUTION when a vaporizer is in use, always aim vapor stream away from crib as well as
away from any wood furniture item.
Purchased Mattress
(See size requirements on
page 6 under CAUTION)
V
T
M
U
M
H
X
Purchased Mattress
(See size requirements on
page 6 under CAUTION)
j
i
LH02728:10/00
