background image

F

ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST

27-1/4 INCHES (69 CENTIMETERS), BY 51-5/8 INCHES (131

CENTIMETERS), WITH A THICKNESS NOT EXCEEDING 6

INCHES (15 CENTIMETERS).

 

the dimensions of the mattress shall be

taken from seam to seam or edge to edge where appropriate.

F

UPON COMPLETION OF ASSEMBLY BE SURE ALL

SCREWS, BOLTS AND FASTENING DEVICES HAVE BEEN

TIGHTENED SECURELY. A FREQUENT CHECK SHOULD BE

MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES

AND TIGHTEN IF NEEDED.

LH01793:05/00

LH01793:05/00

LH01793:05/00

LH01793:05/00

LH01793:05/00

JCHE.p65

CHILD CRAFT INDUSTRIES, INC

.

P.0. Box 444, Salem, IN  USA  47167-0444

• PH- 812/ 883-3111  • FAX-812-883-1819

http://www.childcraftind.com

ENGLISH

MADE IN USA

LH01793:05/00

7

CAUTION

WARNING

F

FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT

IN SERIOUS INJURY OR DEATH.

F

READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.  KEEP INSTRUCTIONS FOR FU-

TURE USE.  

A PLASTIC POUCH IS ATTACHED TO CRIB SPRING FOR PERMANENT STORAGE OF THE INSTRUCTIONAL LITERATURE.

F

BEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR DAMAGED HARDWARE, LOOSE

JOINTS, MISSING PARTS OR SHARP EDGES.  DO NOT USE CRIB IF ANY PARTS ARE MISSING

OR BROKEN.  ASK YOUR DEALER OR WRITE TO CHILD CRAFT, P.O. BOX 444, SALEM, IN 47167-

0444 USA (812)-883-3111)-http://www.childcraftind.com FOR REPLACEMENT PARTS AND IN-

STRUCTIONAL LITERATURE IF NEEDED.  

INCLUDE MODEL IDENTIFICATION NUMBERS WITH YOUR REQUEST WHICH

YOU RECORDED ON PAGE ONE.

  DO NOT SUBSTITUTE PARTS.

F

AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE.

F

WHEN CHILD IS ABLE TO CLIMB OUT OR REACHES THE HEIGHT OF 35 INCHES (90 CENTI-

METERS) THE CRIB SHALL NO LONGER BE USED.

F

DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY

STRANGLE A CHILD.

F

IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

F

DO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED.  BE SURE SIDE IS IN RAISED AND

LOCKED POSITION WHENEVER CHILD IS IN CRIB.

F

WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST POSI-

TION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE

AS STEPS FOR CLIMBING OUT.

F

NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS COVERS

BECAUSE THEY CAN CAUSE SUFFOCATION.

F

DO NOT USE A WATER MATTRESS WITH THIS CRIB.

F

REPLACE TEETHING RAIL(S) IF DAMAGED OR LOOSE. (IF EQUIPPED WITH TEETHING RAILS.)

F

STRINGS CAN CAUSE STRANGULATION!  DO NOT PLACE ITEMS WITH A STRING AROUND A

CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS.  DO NOT SUSPEND STRINGS

OVER A CRIB OR ATTACH STRINGS TO TOYS.

F

REMOVE ALL CRIB TOYS WHICH ARE STRUNG ACROSS CRIB AREA WHEN YOUR CHILD IS

BEGINNING TO PUSH UP ON HANDS AND KNEES OR IS 5 MONTHS OF AGE, WHICHEVER OC-

CURS EARLIEST.  THESE TOYS CAN CAUSE STRANGULATION.

F

WHEN DISASSEMBLING THIS CRIB, DO NOT REMOVE ANY ITEM ATTACHED WITH WOOD

SCREWS.

F

ALWAYS ENSURE A SAFE ENVIRONMENT FOR THE CHILD BY CHECKING REGULARLY, BE-

FORE PLACING THE CHILD IN THE CRIB, THAT EVERY COMPONENT IS PROPERLY AND SE-

CURELY IN PLACE.

s

!

Содержание Legacy 12701








Отзывы: