CHIEF WM-100, Руководство по установке

Страница: 9 / 16

Installation Instructions WM110-120-130
9
Figure 11
4. Slide outer cover of mount (A) back against mounting
bracket. (See Figure 11)
5. Install two #8-32 x 3/4" Phillips pan machine screws (F)
through holes on sides of outer cover. (See Figure 12)
Figure 12
Projector Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the short throw projector mounts
up to (and including) the projector does not exceed 50 lbs
(22.68 kg) for the WM110 or the WM120 or 25 lbs (11.34 kg)
for the WM130.
Refer to Figure 13 to determine hole configuration to use for
each specific projector mount.
Figure 13
RPM Installation
1. Line up mounting holes on RPM mount with corresponding
holes on projector mounting plate. (See Figure 13)
2. Install four 1/4-20 x 1 1/2" Phillips pan machine screws (E)
through RPM holes and into projector mounting plate. (See
Figure 14)
Figure 14
3. Install interface and projector to RPM according to RPM
installation instructions.
4
(K) x 2
(C) x 2
3
cover
(F) x 2
5
(bottom view)
RPM
RPA
RSM
RSA
RPM
mounting plate
(E) x 4
2