CHIEF Truss Pitch-Adjustable Mount TPP Скачать руководство пользователя страница 7

Страница: 7 / 7

Instruction Manual

TPP

Remove the Display

WARNING: Make sure the flag securing the display is com-

pletely raised at all times except when removing or
installing the display. The flag must be all the way
up when installing/removing cables.

WARNING: Watch for pinch points. Do not put your fingers

between movable parts.

Unlock the display from the TPP by lowering the flag all the
way down to the unlocked position.

Using two people, slide the display up and out of the TPP.

Содержание Truss Pitch-Adjustable Mount TPP

Страница 3: ...k 1 SCREW pan head 10 24 1 PLATE assembly pitch adjustable 4 SCREW cap hex head 5 16 18 X 1 2 1 PLATE face 2 NUT Stover locknut 3 8 16 1 FLAG latching 1 SPACER Nylon 38 X 194 X 032 1 NUT Nylock 10 24 2 WASHER flat 3 8 3 WASHER VHMW PARTS ...

Страница 5: ...sing two 3 8 16 Nylock nuts and washers in any matching set of radial holes slotted to allow slight roll adjust ment Figure 4 Vertical Tilt Shown without Back Plate for Clarity Figure 5 Horizontal Tilt Shown without Back Plate for Clarity 3 8 16 Nylock Nuts and Washers Figure 6 Vertical Truss Shown with Back Plate Figure 7 Horizontal Truss Shown with Back Plate ...

Страница 7: ...when removing or installing the display The flag must be all the way up when installing removing cables WARNING Watch for pinch points Do not put your fingers between movable parts 1 Unlock the display from the TPP by lowering the flag all the way down to the unlocked position 4 Using two people slide the display up and out of the TPP ...