background image

Instruction Manual

SLB-9000

1

 IMPORTANT WARNINGS AND CAUTIONS!                                                             

WARNING:

A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION:

A

 CAUTION

 alerts you to the possibility of damage or destruction of equipment if you do not follow the cor-

responding instructions.

WARNING:

Improper installation can result in serious personal injury!  Make sure that the structural members can 

support a redundant weight factor 

five times

 the total weight of the equipment.  If the structure can not 

support this weight, reinforce the structure before installing the SLB-9000.

WARNING: You must use proper attaching hardware and installation procedures. Failure to use proper attaching 

hardware and installation procedures may result in equipment damage or serious personal injury.

WARNING: Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.

WARNING: The installer is responsible for verifying that the mounting surface structural members to which the 

mount is anchored will safely support the combined load of all attached components or other equip-
ment

.

CAUTION:

  Inspect the unit for shipping damage.

CAUTION

:  When attaching the mount, be careful not to overtighten mounting screws.

CAUTION:  

Changes or modifications not approved by Chief Manufacturing could void user’s warranty.

TOOLS REQUIRED FOR INSTALLATION

• Phillips screwdrivers, No. 1 and No. 2

NOTE:

  Other tools may be required depending on the

       method of installation.

Содержание SLB-9000










Отзывы: