CHIEF RLC1, Руководство по установке

Страница: 9 / 12

Installation Instructions RMC1 / RLC1
9
Tilt
The ceiling mounts allow -5° to 20° tilt. The ceiling mount can
be locked at 0°, 5°, 10° and 15° tilt.
3. Loosen two tilt friction screws (located each side). (See
Figure 11)
4. Adjust tilt as required. Note specific degrees of tilt. (See
Figure 11)
5. Tighten two tilt adjustment screws if NOT using the 0°, 5°,
10° or 15° settings.
Figure 11
6. If using the tilt settings of 0°, 5°, 10° or 15°, insert two
10-24 x 5/8" Phillips head screws (X) and two 10-24 lock
nuts (Y) to lock mount at the specific tilt. (See Figure 12)
Figure 12
Security and Cover
1. OPTIONAL : Add padlock (not included) to each interface
bracket to lock display to ceiling mount. (See Figure 13)
Figure 13
2. Install back cover (AA) into four holes on back of ceiling
mount. (See Figure 14)
Figure 14
15°
10°
5°
0°
20°
-5°
Tilt
friction
screw
3
4
5
(Y) x 2
(X) x 2 6
[Example shows
locking tilt at 15°]
(Mount not shown for clarity)
Padlock
(Optional)
(AA)