PAC527 Series
Installation Instructions
12
Installing Backplanes (PACPL1)
IMPORTANT ! :
The backplanes ship installed in the
PAC527 / PAC527F / PAC527FC / PAC527FxP4 /
PAC527FxP6 and may be removed, re-sized or
rearranged as necessary. A backplane kit (PACPL1) is
also available.
1.
FOR BACKPLANES SHIPPED IN PAC527 BOXES ONLY:
Loosen screws (leaving them in the backplanes) holding the
backplanes in the PAC527 box, and remove backplanes
from box. (See Figure 10)
Figure 10
2.
If required, break the backplanes along the scored mid-line.
(See Figure 11)
Figure 11
3.
Attach components to backplanes following component
manufacturer’s instructions.
4.
PACPL1 ONLY:
Loosely install two 10-24 x 3/8" Phillips
external tooth screws (V) into each backplane half. (See
Figure 11)
5.
Reinstall backplanes directly under tabs located at any of
the three levels in the PAC527.
6.
Fasten in place using Phillips screws loosened in Step 1;
OR Phillips screws (V) installed in Step 4. (See Figure 11)
NOTE:
Each individual section of backplane must be fastened
at each end with one of the Phillips screws.
Figure 12
Adding Template/Temporary Cover
NOTE:
OPTIONAL:
Install template (F), if necessary, as a
temporary cover to protect interior of PAC527 box from
debris.
1.
Fold tabs of template (F) in and insert into PAC527 opening.
(See Figure 13)
Figure 13
1
Mid-line
2
4
(V) x 2
3 levels for
backplane
attachment
6
5
(F)
