PAC260/261
Installation Instructions
8
Assembly And Installation
Direct to Display Mounting (PAC260-261D)
1.
If already installed, remove display from mount.
2.
Select proper screw length (C or D) and whether spacers
(E) are required.
CAUTION:
Using screws of improper length may damage
your display! Proper screws will have adequate thread
engagement without contacting bottom of display mounting
holes.
3.
Use selected screws (C or D) and spacers (E), if required,
to connect media player mount (A) to back of display. (See
Figure 1)
Figure 1
Pole Mounting (PAC260-261P)
IMPORTANT ! :
The PAC260-261P mounts are designed
to fit around a 1 1/2” pole. DO NOT mount to any other
size pole!
1.
Use four #10-24 x 5/8” Phillips pan machine screws (G) and
two pole brackets (F) to secure media player mount (A) to
pole at desired mounting height. (See Figure 2)
Figure 2
Wall Mounting (PAC260-261W)
1.
Install FSR assembly (H) to wall according to FSR
installation instructions.
2.
Make sure latching flag is in the open position.
3.
Maneuver media player mount (A) so that all mounting
buttons fit into openings of FSR (H). See FSR Installation
Instructions for further details.
4.
Move latching flag into closed position to secure bracket to
FSR. (See Figure 3)
Figure 3
3
(C or D) x 4
(A)
(E) x 4, if necessary
1
(G) x 4
(A)
(F) x 2
4
