manualshive.com logo in svg

CHIEF PAC-Y1, Инструкция по эксплуатации, Страница: 5 / 6

Поделиться
Скачать
CHIEF PAC-Y1 Скачать руководство пользователя страница 5

4

Instruction Manual

PAC-Y1

ASSEMBLE MOUNT

NOTE:

  Numbers in ( ) refer to parts shown

 in Figure 1.

Assemble mount as follows:

1.

Attach two mounting buttons (120) to left speaker mount 
button support (10) and right speaker mount button sup-
port (20) using four 10-24X7/8” button head cap 
screws (140) and four Nylock nuts (170) (see Figure 1, 
Figure 2, and Figure 3).

2.

Install the latching flag (70) using the 10-24X1/2” Phillips 
undercut screw (80), Nylon spacer (90) and 10-24 Nylock 
nut (60) (see Figure 4).

3.

Install left upright (30) on left speaker mount button 
support (10) using two 1/4-20X1/2” button head cap 
screws (130) (see Figure 5).

4.

Install right upright (40) on right speaker mount button 
support (20) using two 1/4-20X1/2” button head cap 
screws (130) (see Figure 5).

5.

Install height adjustment plate (50) on left 
upright (30), with left speaker mount button support 
attached, using two 1/4-20X1/2” button head cap 
screws (130) (see Figure 5).

6.

Install height adjustment plate (50) on right 
upright (40), with left speaker mount button support 
attached, using two 1/4-20X1/2” button head cap 
crews (130) (see Figure 5).

Figure 5. Bottom Portion Assembly

Figure 4. Install Latching Flag

10-24 Nylock Nut

Nylon Spacer

Latching Flag

10-24X1/2” Phillips Undercut Screw

Figure 3. Mounting Button Attachment

Mounting Button

Button Support

10-24X7/8”

Button Head

Cap Screw

10-24

Nylock
Nut

Figure 2. Mounting Button Location

Mounting Buttons

Button Support

Содержание PAC-Y1







Отзывы:

Нет отзывов