background image

PAC-710

Installation Instructions

4

6.

Raise shelf bracket and hook over shelf’s right stud. (See
Figure 6)

Figure 6

7.

Turn both knobs clockwise to tighten the shelf in place. (See
Figure 6)

CAUTION:

This shelf is intended for use with equipment

weighing not more than 25 lbs (11.34 kg) and having
dimensions that will permit it to sit evenly on this shelf. Use
with other equipment may result in instability causing
possible injury.

CAUTION:

Do NOT sit or hang on the shelf. Such use may

result in instability causing possible injury and damage to
equipment.

CAUTION:

Equipment MUST be fastened to the shelf

before moving the cart or stand. If equipment is not fastened
to the shelf it MUST be removed before moving the cart or
stand.

Installing Optional Safety Strap

To install the optional safety strap:

1.

Place equipment on shelf (A).

2.

Thread strap (B) through slots in shelf (A). (See Figure 7)

Figure 7

3.

Loop strap (B) over top of equipment and slide strap end
into clasp. (See Figure 8)

Figure 8

4.

Pull strap (B) until tight around equipment and press clasp
closed to secure. (See Figure 9)

Figure 9

Cable Management

Follow cable management instructions in the stand or cart
installation instructions.

5

6

Knobs shown
removed for
viewing purposes
only.

RIght Stud

2

(A)

(B)

(B)

(A)

3

(A)

4

(B)

Содержание PAC-710







Отзывы: