MULTICUTTER MC40
5
OFF
ON
DESCRIPTION OF UNIT DEVICES
(see picture 1)
A) Input power cable
Confirm the input voltage before use.
B) Gas reducing unit
Adjust the gas pressure and make it is adequate to machine.
C) Control socket for torch
D) Mains switch
E) Adjustable Current knob
Adjust the current and make adequate to cut the work piece.
F) Socket for torch
G) Warning light
If something wrong with the machine, if will light.
H) Socket for work clamp
I)
Gas flow delay
The time for gas flow after finish cutting.
K) Ground connector for the machine case
E
G
F
C
H
Picture 1
I
A
K
B
D
