Installation Instructions
MTR Series
6
ATTACH MSB TO THE DISPLAY
To attach the MSB to the display, do the following:
•
To help your identify the correct MSB that matches
the model number of your display, refer to the cross-
reference chart at
www.chiefmfg.com
.
•
To download the corresponding MSB installation
instructions, refer to
www.chiefmfg.com
.
OR
•
Contact Customer Service at 952-582-6480 if you
have any questions about how to select the MSB that
matches the model number of your display.
INSTALL THE DISPLAY
To install the display, do the following:
NOTE:
Verify that all
power/audio/video cables
are
disconnected from the display and the latching
flag is lowered in the down position before
attempting to mount the display.
1.
With the aid of another person, lift the display up to
the mount (10) on the wall, aligning mounting
buttons on the MSB with the teardrop slots on the
mount, and lower the display firmly into place (see
Figure 5).
2.
Raise the latching flag (2 places) to secure the display
(see Figure 6). If the flag does not fully engage,
check to ensure the mounting buttons are fully seated
in the slots.
NOTE:
A padlock may be installed through the hole in
the latching flag for additional security.
Figure 5. Mount Plasma Tilt Bracket to Wall
Figure 6. Raise Latching Flag to Lock
Raise
Latching
Flag
Teardrop
Slot
MTR Mount
Display
MSB
