Installation Instructions
MSP-DCCGPM-210
6
Figure 4. Flush Mount
Attaching the VESA Bracket to the Display
(Step 2)
NOTE:
Choose the instructions, listed below, that apply to the
type of installation you want.
•
Flush Mount Applications do not use spacers. The
display is attached to the mount with six screws.
•
Recessed Mount Applications use spacers. The
display is attached to the mount with six screws and
four spacers. For the procedure, refer to page 7.
CAUTION:
If monitor uses a screw size other than those
included in the kit, DO NOT use the screws
provided. Using the wrong screws could result in
damage to your monitor.
Flushed Mount
A.
Place the VESA bracket (10) on the display
(see Figure 4).
B.
Align the hole-pattern of your display with the hole-
pattern on the VESA bracket (10).
C.
Attach VESA bracket (10) to the display using six
M4 X 10mm screws (70) provided.
Step 2
10
70
