background image

PART #MSP-DCC9000
Universal
Ceiling Projector Mount Kit

BEFORE YOU BEGIN

CAUTION:  To prevent damage to the Universal Ceiling Mount, which could affect or void the Factory warranty, thor-
oughly study all instructions and illustrations before you begin to install the Universal Ceiling Mount.  Pay particular
attention to the “Important Precautions” on Page 1.

If a defect is discovered after Dell’s initial 21 day Customer Satisfaction period, Chief Mfg. will, at its option, repair or replace
the product at no charge provided it is returned during the warranty period.  Please note contact information for Chief Mfg.
listed below.

I N S T R U C T I O N      M A N U A L

The Universal Ceiling Projector Mount provides a unique, sim-
plified method of ceiling mounting your inverted projector. This
low profile design offers three easy mounting methods (adjust-
able column, flush or threaded rod); roll, pitch and yaw adjust-
ment; a cable management system; and a universal bracket that
allows quick projector disconnect without loss of registration.

The Universal Ceiling Projector Mount is constructed of heavy
gauge steel and designed to ensure proper projector ventilation.

Fast and precise image registration is achieved through the easy
roll, pitch and yaw adjustments built into the Universal Ceiling
Projector Mount.

8832-000026 Rev. B

2008 Milestone AV Technologies

www.chiefmfg.com

11/08

Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN  55378

P: 800.582.6480 / 952.894.6280  F: 877.894.6918 / 952.894.6918

Содержание MSP-DCC9000













Отзывы: