Installation Instructions
MSP-DARAC3
7
ADJUSTMENTS
The MSP-DARAC3 provides for up to 90° of upward pitch, and
25° of downward pitch.
Pitch Adjustment
1.
Pull entire handle out away from mount to allow handle
position to be adjusted to be prior to pitch adjustment. (See
Figure 6)
NOTE:
In order to maximize leverage, position handle in lower
position.
2.
Adjust handle to desired position. (See Figure 6)
3.
Push entire handle back towards mount prior to pitch
adjustment. (See Figure 6)
Figure 6
IMPORTANT ! :
Make sure the weight of the display is
adequately supported while adjusting the pitch in Steps
4-6!
4.
Lift handle up until pitch can be adjusted easily. (See Figure
7)
5.
Adjust pitch to desired position. (See Figure 7)
6.
Push handle down until faceplate is locked at desired pitch
position. (See Figure 7)
Figure 7
1
2
3
4
6
5
