MSP-CSC11
Installation Instructions
10
Adjusting Cart Height
NOTE:
The column assembly contains a gas spring which
allows for safe and easy height adjustment after the
display has been mounted. Adjusting the height when
the display is not attached is much more difficult and
not recommended.
1.
Pull out knob on the column assembly and turn 90
o
in either
direction to disengage the locking mechanism. (See Figure
15)
2.
Raise or lower the display using the back handle. (See
Figure 15)
3.
Turn the knob 90
o
either direction to engage the knob and
lock the cart at desired height. (See Figure 15)
IMPORTANT ! :
Set the height of the cart so the display
does NOT rest on the lower part of the center post.
(See Figure 15) Always set the height so the knob is
engaged in a hole in the center post.
Figure 15
Cart Use and Maintenance
CAUTION:
This cart is intended for use only with the
products and maximum weights indicated. Use with other
products or products heavier than the maximum weights
indicated may result in instability causing possible injury.
WARNING:
CART CAN TIP OVER RESULTING IN RISK
OF INJURY. Do not allow children under 16 to move cart.
Only adults should move this cart. Move cart slowly. Apply
moving force on narrow dimension. Never apply force at top -
always push or pull with handle.
Figure 16
2
1
back handle
3
do NOT let display
rest here
Do NOT push
cart near top
Push or pull cart with handle
1